Vcds Lite 1.2 Full 'LINK' Registered Activa

Vcds Lite 1.2 Full 'LINK' Registered Activa

Click Here ===== https://fancli.com/2tyzBE

How to Use VCDS Lite 1.2 Full Registered and Activated

VCDS Lite is a software that allows you to diagnose and modify your Volkswagen, Audi, Seat or Skoda car using a standard OBD-II interface cable. With VCDS Lite, you can access various modules, read and clear fault codes, view live data, perform basic settings and adaptations, and more.

However, to unlock the full potential of VCDS Lite, you need to register and activate it. This will enable you to use all the features of the software without any limitations. In this article, we will show you how to use VCDS Lite 1.2 full registered and activated on your PC.

What You Need

To use VCDS Lite 1.2 full registered and activated, you need the following:

A PC running Windows XP or newer (not Windows RT).

A compatible OBD-II interface cable that supports KKL (ISO 9141-2 and ISO 14230-4) protocols. You can buy one from Ross-Tech or other online sellers.

A copy of VCDS Lite 1.2 software downloaded from Ross-Tech's website[^2^].

A valid activation code that matches your PC's hardware ID. You can obtain one from Ross-Tech or other authorized resellers.

How to Install VCDS Lite 1.2

To install VCDS Lite 1.2 on your PC, follow these steps:

Run the downloaded installer file and follow the instructions on the screen.

Choose the default installation folder (C:\\Ross-Tech\\VCDS-Lite\\) or select a different one if you prefer.

Click Finish when the installation is complete.

How to Register and Activate VCDS Lite 1.2

To register and activate VCDS Lite 1.2 on your PC, follow these steps:

Connect your OBD-II interface cable to your PC's USB port and to your car's diagnostic port (usually located under the dashboard).

Start VCDS Lite by clicking on its icon on your desktop or in the Start menu.

Select Options from the menu bar and then Test.

If your interface cable is detected and working properly, you should see a message saying \"Port Status: OK\". If not, check your cable connection and driver installation.

Select Options again and then About.

You should see your PC's hardware ID displayed on the screen. Write it down or copy it to a text file.

Go to Ross-Tech's website[^2^] and enter your hardware ID in the activation form. You will also need to provide your name, email address and payment details.

Once your payment is processed, you will receive an email with your activation code.

Copy the activation code and paste it into the Activation field in VCDS Lite's About window.

Click Register/Activate.

You should see a message saying \"Registration Successful\". If not, check your activation code and hardware ID for errors.

How to Use VCDS Lite 1.2 Full Registered and Activated

To use VCDS Lite 1.2 full registered and activated on your car, follow these steps:

Make sure your car's ignition is on but the engine is not running.

Select Options from the menu bar and then Select Control Module.

Choose the module you want to access from the list (e.g. Engine, Airbag, ABS etc.).

You should see a screen with various options such as Fault Codes, Measuring Blocks, Output Tests etc.

Select the option you want to use and follow the instructions on the screen.

Note: Some modules may require additional steps or procedures to access or modify them. Refer to Ross-Tech's website[^2^] or online forums for more information and guidance.

Conclusion

VCDS Lite is a powerful tool that can help you diagnose and customize your 061ffe29dd